Used Hypoid Helixform Gear Finisher fitted with shuttle type

Auto loader/ unloader,

Auto deburring tool,

Hydraulic indexing,

Auto coolant turn no/off at cut position

Pitch Diameter (Max) 10 to 1 ratio:-

266mm, 2.5 to 1 ratio:- 238mm.

Diametral pitch (Coarsest) 10mod.

Extreme ratio (Minimum) 2.5:1

Face width (Maximum) 41mm

Full depth 19mm

Number of Teeth 20-150

Diameter taper hole at large end 3 27/64 inch

Taper per foot 1/2 inch

Depth of taper 5/8 inch

Main Motor 3HP 1500rpm,

Hydraulic Motor 3HP 1500 rpm

Coolant motor 1HP 1500rpm

Magnetic chip separator 1/8HP 1500 rpm