CAPACITY:
 Max pitch diameter: 10:1 ratio............ 10.5 inch   266 mm
     2.5:1 ratio............ 9.375 inch  238 mm
 Coarsest diametral pitch.................. 2.5 D.P.  10 Module
 Min extreme ratio......................... 2.5:1
 Max face width............................ 1.625 inch  41 mm
 Max depth................................. 0.75 inch   19 mm
 Number of teeth........................... 20 - 150
 WORKSPINDLE:
 Diameter of taper hole at large end....... 3 27-64 inch
 Taper per foot............................ 1/2 inch
 Depth of taper............................ 5/8 inch
 CUTTER DIAMETERS.......................... 5 inch, 6 inch, 7.5 inch & 9 inch
 FEEDS & SPEEDS:
 Cutter speeds............................. 82' - 215'/min 25 - 65 m-min
 Feeds..................................... 2 - 10 sec - tooth
 ELECTRICAL:
 Main motor................................ 7.5 HP @ 1500 rpm
 Hydraulic motor........................... 3 HP @ 1500 rpm
 Coolant motor............................. 1.5 HP @ 1500 rpm
 Magnetic chip separator motor............. 0.125 HP @ 1500 rpm
 NETT WEIGHT............................... 13,500 lbs  6,123 kg

 Complete with:-
  External chamfering attachment.
  Hydraulic chucking.
  Bore inspection device.
  One set of speed gears to cut one gear.
  One set of feed gears to cut one gear.
  Index arrangement to cut one gear.
  Feed cam No.  (To be advised)
  Chip conveyor having magnetic separator.
  Guards.
  Coolant.
  Electrics 380, 3, 50. (Dual wired)
  METRIC machine.

The machine is in our stock in germany