|
The platen size of Buhler 800B version 6 is bigger than usual.
Accessories : Dosing Furnace ( You don’t needle ladle with this furnace) , Kawasaki Robot and Wollin
YOM 1996 and actual went in production in 1998 TECHNICAL DATA: Locking Force (Strain Gauge Tested) kn 9200
Injection Force, Consolidation Phase (Adjustable) kn 650-265 1)
Plunger Stroke mm 580
Injection Positions (Standard) mm 0, -50, -300, -350
Ejection force kn 340
Ejector stroke (adjustable) mm 175
Dimensions of fixed die platen (H X V ) mm 1410 x 1590
Dimensions of moving die platen (H X V ) mm 1410 x 1410
Space between tie bars mm 900 x 900
Tie bar diameter mm 180
Min. die height mm 330
Max. die height mm 1050
Stroke of moving platen mm 900
Free cycles per hour n/h 300
Rated installed capacity kw 55
Machine area L X W (incl. safety gates) m 9082 x 3.52
Machine height m 3.3
Machine weight, ready for production kg 40900 ca.
Dimensions of the control cabinet L X W X H (IC) m 1.4 x.4x 1.65
1) AccessoryEequipment: (DATACESS) m 1.2 x .5 x 1.805
Injection force, consolidation phase (adjustable) kN 800 - 265
PRODUCTION DATE (Standard injection unit)
| PLUNGER DIAMETERS | MM | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | | Theoretical shoot volume(DIN 24480) | cm3 | 1488 | 1944 | 2460 | 3037 | 3674 | 4373 | 5132 | 5952 | | Max. shot weight fro A1* | kg | 4.2 | 5.5 | 6.9 | 8.5 | 10.3 | 12.3 | 14.4 | 16.7 | | Max. specific casting pressure | bar | 1690 | 1293 | 1021 | 828 | 648 | 574 | 489 | 422 | | Max. projectted area ** at max. specific casting pressure | cm2 | 544 | 711 | 901 | 1111 | 1419 | 1602 | 1881 | 2180 | *The max. shot weight is calculated :
Plunger stroke x plunger area x 0.75 x density
Density for aluminium (A1) =2.5 g/cm3
(Multiply by 0.65 for magnesium alloys, by 2.5 for zinc alloys and by 3.2 for copper base alloys)
**Max. theoretical projected area on max .specific injection pressure, without consideration of core locking and dynamic part of injection process.
|